Client Background
A shipyard in Busan outfitting two 180,000 DWT bulk carriers needed grating for engine room floor plates, purifier room platforms, deck machinery walkways and pump room access. Historically the yard used galvanized carbon steel, which required repainting within eighteen months in the engine room and generated recurring class observations on coating breakdown.
Project Requirements
- Full resistance to marine atmosphere, fuel oil, lubricating oil and bilge water.
- No painting permitted: the owner's specification required unpainted, maintenance-free surfaces.
- Class compliance with ABS and Korean Register documentation for each panel batch.
- Fire-safe, non-combustible construction.
- Delivery aligned to the vessel's outfitting sequence, with panels tagged by compartment.
Our Solution
Hebei Luojie Metal Products Co., Ltd supplied 2,900 m2 of SS316L press-locked grating with 25 x 3 mm bearing bars at 30 mm pitch, 6 mm cross bars at 100 mm pitch and a serrated top surface for oily floor plates. All fasteners, clips and edge trims were also SS316L, avoiding galvanic couple corrosion where the grating meets the ship's structure.
| Parameter | Specification |
|---|---|
| Product type | Marine deck & engine room grating |
| Bearing bar | 25 x 3 mm @ 30 mm pitch |
| Cross bar | 6 mm @ 100 mm pitch, press-locked |
| Material | Stainless steel 316L (EN 1.4404) |
| Surface | Serrated anti-slip |
| Finish | Mill finish, post-cut passivated |
| Panel size | 1,000 x 2,000 mm, compartment tagged |
| Load rating | 5.0 kN/m2 + 1.5 kN point load |
| Standards | ABS / Korean Register |
| Quantity | 2,900 m2 (1,300 panels) |
Fabrication Control
Panel sizes followed the yard's standard 1,000 x 2,000 mm module so that the same crates could pass through engine room access hatches, and spare panels remain interchangeable between both vessels. A six-panel spare set travelled inside the second shipment at no extra freight cost.
All panels were passivated after cutting to restore the chromium-oxide layer at sheared edges, a step frequently skipped in marine supply and the usual origin of rust bleeding at panel edges. Panels were then packed with interleaved plastic film and compartment-tagged to match the yard's outfitting drawings, so pipe fitters could install straight from the crate.
Project Results
- 2,900 m2 delivered in two shipments aligned with the outfitting sequence.
- Zero rust bleeding at panel edges at the six- and twelve-month inspections.
- Maintenance painting of grating surfaces removed from the vessel's planned maintenance system.
- The yard adopted SS316L grating with post-cut passivation as standard for engine room floor plates.
Client Feedback
"We stopped painting grating in the engine room. Over twenty years that is a real saving for the owner, and the class surveyor has nothing to write up." - Outfitting Manager, Busan Shipyard
About Hebei Luojie Metal Products Co., Ltd
Founded in 2002 in Anping County, Hebei Province, China, Hebei Luojie Metal Products Co., Ltd manufactures and exports steel grating and wire mesh products with a workforce of more than 500 people. The company supplies high-precision metal solutions to oil and gas, chemical processing, construction, mining and food filtration customers in over 50 countries across North America, Europe and Southeast Asia.