Client Background
A petrochemical complex in Jubail operates a sulphuric acid and oleum unit where acid mist, ambient temperatures around 45 degrees Celsius and regular wash-down combine to destroy conventional finishes. Galvanized carbon steel grating on the acid circulation pump platforms had failed within fourteen months, with the coating fully consumed and visible section loss on the bearing bars.
Project Requirements
- Resistance to sulphuric acid mist and occasional spill at concentrations up to 98%.
- High-friction surface that remains effective when wet or contaminated, as operators walk these platforms in heavy PPE.
- No combustible material anywhere in the system.
- Load rating of 5 kN point load plus handrail line loads.
- Fabrication and delivery inside a nine-week shutdown planning window.
Our Solution
Hebei Luojie Metal Products Co., Ltd engineered 1,650 m2 of SS316L grating with 30 x 4 mm bearing bars at 30 mm pitch and 6 mm cross bars at 50 mm pitch. The walking surface uses a gritted epoxy-carbide layer set into a recessed channel on the bearing bar head, which delivers a wet friction coefficient well above plain serration while avoiding the crevices that trap acid in conventional grit-bonded surfaces. Handrails, kick plates and clips were all SS316L.
| Parameter | Specification |
|---|---|
| Product type | Corrosive-area platform grating |
| Bearing bar | 30 x 4 mm @ 30 mm pitch |
| Cross bar | 6 mm @ 50 mm pitch, welded |
| Material | Stainless steel 316L (EN 1.4404) |
| Surface | Gritted epoxy-carbide insert, wet-rated |
| Finish | Mill finish, passivated |
| Panel size | 1,000 x 2,000 mm, pre-drilled |
| Load rating | 5 kN point load + handrail line loads |
| Standards | EN ISO 14122-2 / EN 1.4404 |
| Quantity | 1,650 m2 + 210 m handrail |
Engineering Support
Panels were supplied with stainless saddle clips and pre-drilled fixing holes matched to the existing support steel, so no site drilling or hot work was needed inside the live acid area.
We reviewed the failed panels and confirmed that the root cause was coating selection rather than load design, so the section was retained and only the material and surface changed, the most economical route for the client. Our team also produced an isometric installation drawing set aligned to the unit's existing structural steel, avoiding clashes with acid piping added after the original design.
Project Results
- Installed inside the planned shutdown with no impact on the unit restart schedule.
- No corrosion, pitting or surface degradation after twelve months in the acid circulation area.
- Wet-condition friction confirmed by site testing above the client's minimum threshold.
- The complex extended the specification to two further acid-handling areas.
Client Feedback
"Galvanized grating lasted fourteen months here. After a year in acid mist, the stainless gritted panels still look new. This is now our reference specification for corrosive areas." - Reliability Engineer, Jubail
About Hebei Luojie Metal Products Co., Ltd
Founded in 2002 in Anping County, Hebei Province, China, Hebei Luojie Metal Products Co., Ltd manufactures and exports steel grating and wire mesh products with a workforce of more than 500 people. The company supplies high-precision metal solutions to oil and gas, chemical processing, construction, mining and food filtration customers in over 50 countries across North America, Europe and Southeast Asia.