Client Background
The owner of a 300 MW photovoltaic plant outside Dubai needed safe, maintenance-friendly access across inverter stations, transformer plinths and cable trenches. Sand accumulation, surface temperatures reaching 50 degrees Celsius and intense UV had degraded the site's original access arrangements, and operations and maintenance technicians were walking on cable trench covers that were never designed for foot traffic.
Project Requirements
- Walkways light enough to be handled by a two-person crew without crane access.
- Resistance to airborne sand abrasion and daily thermal cycling from 15 to 50 degrees Celsius.
- Open area above 60% so that sand falls through rather than accumulating.
- Load capacity for technicians carrying tool bags and module replacement equipment.
- Phased delivery matching the plant's commissioning blocks.
Our Solution
Hebei Luojie Metal Products Co., Ltd supplied 3,800 m2 of hot-dip galvanized steel grating with 25 x 3 mm bearing bars at 30 mm pitch and 6 mm cross bars at 100 mm pitch, delivering a 68% open area so that wind-blown sand passes through instead of building up on the surface. Panels were limited to about 12 kg so two technicians can lift and reposition them by hand, and a sand-gritted surface was applied along the walking line to maintain grip on polished galvanized steel.
| Parameter | Specification |
|---|---|
| Product type | O&M walkway grating, cable trench covers |
| Bearing bar | 25 x 3 mm @ 30 mm pitch |
| Cross bar | 6 mm twisted @ 100 mm pitch |
| Material | Carbon steel (ASTM A36) |
| Surface | Sand-gritted walking line; 68% open area |
| Finish | Hot-dip galvanized, 85 micron avg |
| Panel size | 1,000 x 2,000 mm, approx. 12 kg each |
| Load rating | 4.0 kN/m2 + 1.5 kN point load |
| Standards | ASTM A123 |
| Quantity | 3,800 m2 (2,100 panels) |
Delivery and Site Support
All steel was galvanized after cutting and drilling, including panel edges and cut-outs, so that no bare steel was left exposed to sand abrasion and UV in the desert environment.
The plant was commissioned in four blocks over eighteen months, so we scheduled four shipments against the EPC's commissioning milestones. Each consignment was packed with block-coded labels and accompanied by a simple panel layout drawing that the site team could use without engineering support.
Project Results
- All four phases delivered on schedule with no material shortfalls at the block handovers.
- Sand build-up on walkways eliminated, reducing the maintenance crew's monthly cleaning hours.
- No coating breakdown or rust staining after two summers at 50 degree surface temperature.
- Cable trench covers replaced with traffic-rated grating, removing a recurring safety finding.
Client Feedback
"The open area was the key detail. Our old covers turned into sand traps. These panels stay clean, and two technicians can move them by hand when they need to reach a cable." - O&M Manager, Dubai
About Hebei Luojie Metal Products Co., Ltd
Founded in 2002 in Anping County, Hebei Province, China, Hebei Luojie Metal Products Co., Ltd manufactures and exports steel grating and wire mesh products with a workforce of more than 500 people. The company supplies high-precision metal solutions to oil and gas, chemical processing, construction, mining and food filtration customers in over 50 countries across North America, Europe and Southeast Asia.