Client Background
A copper concentrate plant in the Antofagasta region of northern Chile, operating at 3,900 m above sea level, required replacement grating for crusher access platforms, conveyor walkways and thickener bridges. The existing galvanized grating had thinned at the welds after only six years in service, and the site had recorded two near-miss incidents where bearing bars deformed under loaded maintenance carts.
Project Requirements
- 15 kN point load for crusher maintenance platforms carrying hydraulic tooling.
- High UV and abrasive-dust environment with daily wash-down at 3,900 m altitude.
- Anti-slip performance on steeply inclined conveyor walkways up to 12 degrees.
- Chilean mining standard documentation, including mill certificates issued in Spanish.
- Delivery to the port of Antofagasta with onward transport to a site at 4,000 m.
Our Solution
Hebei Luojie Metal Products Co., Ltd specified 50 x 6 mm bearing bars at 30 mm pitch with 10 mm twisted cross bars at 50 mm pitch, welded on every bearing bar, giving a 15 kN point-load rating on 1.5 m spans. Bearing bar depth was increased from the original 40 mm to 50 mm: the root cause of the previous failures was under-designed bars at crusher level, not coating loss. Panels received a 100 micron minimum hot-dip galvanized coating, with sand-gritted nosings on the inclined sections for grip at 12 degrees.
| Parameter | Specification |
|---|---|
| Product type | Heavy-duty mining platform & conveyor walkway grating |
| Bearing bar | 50 x 6 mm @ 30 mm pitch |
| Cross bar | 10 mm twisted @ 50 mm pitch, fully welded |
| Material | Carbon steel (ASTM A36) |
| Surface | Serrated + sand-gritted nosings on inclines |
| Finish | Hot-dip galvanized, 100 micron minimum |
| Panel size | 1,000 x 2,000 mm |
| Load rating | 15 kN point load @ 1.5 m span |
| Standards | ASTM A123 / ASTM A36 |
| Quantity | 5,600 m2 (2,340 panels) |
Engineering and Logistics
Our engineers reviewed photographs of the failed panels and the client's load records, then proposed the deeper bar rather than simply reordering the original section. That change increased panel weight by 18% but eliminated the deflection problem. Documentation was issued bilingually, and panels were packed in seaworthy crates rated for the 1,200 km road haul to site.
Project Results
- 5,600 m2 delivered to Antofagasta in 58 days and installed during a single plant shutdown.
- Deflection measured on site at L/310 under the 15 kN test load.
- No panel deformation reported after 18 months of crusher-level service.
- Maintenance cart incidents eliminated; the site standardised on the 50 x 6 mm section.
Client Feedback
"The previous supplier sold us the same section twice. These engineers looked at why the bars were bending and gave us a deeper bar. That is the difference." - Plant Maintenance Superintendent, Antofagasta
About Hebei Luojie Metal Products Co., Ltd
Founded in 2002 in Anping County, Hebei Province, China, Hebei Luojie Metal Products Co., Ltd manufactures and exports steel grating and wire mesh products with a workforce of more than 500 people. The company supplies high-precision metal solutions to oil and gas, chemical processing, construction, mining and food filtration customers in over 50 countries across North America, Europe and Southeast Asia.