Stainless Steel 304 Grating with Hinged Access Panels for the Rotterdam Municipal Wastewater Treatment Plant

2026-11-17
Latest company cases about Stainless Steel 304 Grating with Hinged Access Panels for the Rotterdam Municipal Wastewater Treatment Plant

Client Background

The municipal wastewater treatment authority serving the Rotterdam port area operates a 420,000 population-equivalent plant with twelve aeration tanks, four clarifiers and a sludge dewatering hall. Aged concrete walkways and thin steel covers had become a safety liability: hydrogen sulphide attack had pitted the old covers, and operators reported repeated slip incidents during wet-weather inspections.

Project Requirements

  • Non-slip walking surface compliant with EN ISO 14122-2 for permanent access to machinery.
  • Resistance to hydrogen sulphide, chloride and cleaning chemicals, with no painted or galvanized finish accepted.
  • Hinged, lockable access panels of 800 x 800 mm over every valve and weir gate, operable by one person.
  • Design load of 4.0 kN/m2 uniformly distributed plus a 1.5 kN point load on panels.
  • Installation during normal plant operation, in four phased shutdown windows.

Our Solution

Hebei Luojie Metal Products Co., Ltd supplied 1,850 m2 of SS304 press-locked grating in a 25 x 3 mm bar at 30 mm pitch configuration, with a 5 mm serrated top surface for wet conditions. Seventy-two hinged access panels were fabricated with stainless piano hinges, gas-spring assisted lift and a stainless safety catch, so a single operator can open them safely above an active channel.

ParameterSpecification
Product typeWalkway grating with hinged access panels
Bearing bar25 x 3 mm @ 30 mm pitch
Cross bar6 mm twisted @ 100 mm pitch, press-locked
MaterialStainless steel 304 (EN 1.4301)
SurfaceSerrated anti-slip
FinishMill finish, passivated
Panel size1,000 x 2,000 mm; 72 access panels 800 x 800 mm
Load rating4.0 kN/m2 + 1.5 kN point load
StandardsEN ISO 14122-2 / EN 1993-1-1
Quantity1,850 m2 (72 hinged panels)

Engineering Support

Panel sizes were set at 1,000 x 2,000 mm so that each unit could be carried through the existing 900 mm doorways of the tank galleries without cutting on site, a constraint that shaped the entire panel layout.

Our engineers produced shop drawings directly from the authority's as-built survey, including 214 edge cut-outs around pipe penetrations and handrail posts. Because the plant could not be drained for long periods, we delivered in four colour-coded batches matching the shutdown sequence, so the contractor could install one tank line at a time without storing material on site.

Project Results

  • Slip incidents in the aeration area fell to zero in the twelve months after installation.
  • Average valve inspection time reduced from 25 minutes to 6 minutes thanks to the hinged panels.
  • No corrosion or staining observed after two full dewatering and chemical cleaning cycles.
  • Phased delivery allowed installation with no unplanned plant shutdown.

Client Feedback

"The hinged panels were the detail our operators asked for years ago. One person can now open a weir gate cover safely, and the serrated surface finally gives us grip when the deck is wet." - Maintenance Manager, Rotterdam

About Hebei Luojie Metal Products Co., Ltd

Founded in 2002 in Anping County, Hebei Province, China, Hebei Luojie Metal Products Co., Ltd manufactures and exports steel grating and wire mesh products with a workforce of more than 500 people. The company supplies high-precision metal solutions to oil and gas, chemical processing, construction, mining and food filtration customers in over 50 countries across North America, Europe and Southeast Asia.