Client Background
An EPC contractor building two 660 MW coal-fired units in Gujarat required grating for boiler maintenance platforms, air-preheater access levels and coal-handling conveyor walkways. The platforms sit between 18 m and 62 m above grade, where ambient temperatures reach 55 degrees Celsius and maintenance crews carry tools and spare parts up narrow stair towers.
Project Requirements
- 7.5 kN concentrated load with a maximum deflection of L/200 on 1.5 m spans.
- Aggressive anti-slip surface for greasy, coal-dust-covered walkways.
- Non-combustible steel construction with documented fire performance for the cable-tray levels.
- Hot-dip galvanizing to IS 4759 and ASTM A123 with a minimum 70 micron coating.
- Full traceability: heat numbers and mill certificates for every bearing bar batch.
Our Solution
Hebei Luojie Metal Products Co., Ltd specified 40 x 5 mm bearing bars at 30 mm pitch with 8 mm twisted cross bars at 50 mm pitch, the densest cross-bar arrangement in our standard range, to resist footfall from maintenance crews carrying loads up the stair towers. The top surface is deep-serrated on both the bearing bar and the cross bar, which our testing shows maintains friction even under a 2 mm coal-dust layer.
| Parameter | Specification |
|---|---|
| Product type | Heavy-duty boiler platform & stair grating |
| Bearing bar | 40 x 5 mm @ 30 mm pitch |
| Cross bar | 8 mm twisted @ 50 mm pitch, welded |
| Material | Carbon steel (IS 2062 / ASTM A36) |
| Surface | Deep serrated, both directions |
| Finish | Hot-dip galvanized, 70 to 95 micron (IS 4759) |
| Panel size | 1,000 x 2,000 mm, banded edges |
| Load rating | 7.5 kN point load, L/200 deflection |
| Standards | IS 4759 / ASTM A123 |
| Quantity | 2,600 m2 + 380 stair treads |
Fabrication and Documentation
Stair treads were supplied with a matching serrated surface and pre-drilled bolt holes, so the contractor could fix them to the existing stringers without on-site fabrication or re-galvanizing of cut edges.
Panels were fabricated with banded edges and bolted saddle-clip fixings so that they can be lifted by crane in 6 m2 bundles. Every consignment arrived with mill certificates cross-referenced to laser-etched heat numbers on the panel edges, which allowed the EPC quality team to close out the steel traceability dossier without additional sampling.
Project Results
- 2,600 m2 and 380 stair treads delivered across four shipments with zero dimensional rejections.
- Deflection testing on site confirmed a maximum of L/230, comfortably inside the L/200 limit.
- Galvanized coating measured 70 to 95 micron, meeting the specification on every audited panel.
- The EPC reused the same specification for a second 2 x 660 MW site awarded six months later.
Client Feedback
"Coal dust and monsoon rain make those walkways genuinely dangerous. The deep serration is the only surface our safety auditors have accepted without additional chequer plate." - QA/QC Manager, EPC Contractor, Gujarat
About Hebei Luojie Metal Products Co., Ltd
Founded in 2002 in Anping County, Hebei Province, China, Hebei Luojie Metal Products Co., Ltd manufactures and exports steel grating and wire mesh products with a workforce of more than 500 people. The company supplies high-precision metal solutions to oil and gas, chemical processing, construction, mining and food filtration customers in over 50 countries across North America, Europe and Southeast Asia.