Hot-Dip Galvanized Steel Grating for Offshore Oil Platform Walkways: 3,200 m2 Gulf of Mexico Refurbishment

2026-11-17
Latest company cases about Hot-Dip Galvanized Steel Grating for Offshore Oil Platform Walkways: 3,200 m2 Gulf of Mexico Refurbishment

Client Background

A Houston-based offshore engineering contractor maintains a fleet of more than forty fixed production platforms in the Gulf of Mexico. Every hurricane season the company runs a rolling refurbishment program, replacing corroded walkway, stair tread and deck grating across three to five platforms. In early 2025 the client issued a tender for 3,200 m2 of replacement grating covering three shallow-water platforms and two access bridges.

Project Requirements

  • Corrosion resistance: continuous salt-spray exposure with relative humidity above 80% and frequent deck wash-down.
  • Load performance: 5 kN concentrated load on 1.0 m clear spans for personnel walkways, 7.5 kN for equipment access zones.
  • Slip resistance: anti-slip surface suitable for wet, oil-contaminated and diver-boot traffic.
  • Compliance: ASTM A123 zinc coating, ASTM A36 bearing bars and ABS class survey documentation.
  • Delivery: complete shipment within seven weeks to a Gulf port, with panel-level marking for platform-by-platform installation.

Our Solution

Hebei Luojie Metal Products Co., Ltd engineered a standard cross-section family so that the client could use a single spare-parts inventory across all three platforms: 32 x 5 mm load-bearing bars at 30 mm pitch, twisted cross bars at 100 mm pitch, and a 6 mm knurled upper surface. Panels were produced in a 1,000 x 2,000 mm module with a self-supporting 1.0 m clear span, which removed roughly 40% of the secondary steel that the original design required.

ParameterSpecification
Product typePlatform & walkway grating
Bearing bar32 x 5 mm @ 30 mm pitch
Cross bar6 mm twisted @ 100 mm pitch
MaterialASTM A36 carbon steel
SurfaceKnurled anti-slip
FinishHot-dip galvanized, 86 micron avg (ASTM A123)
Panel size1,000 x 2,000 mm
Load rating5 kN point load @ 1.0 m span
StandardsASTM A123 / ASTM A36 / ABS
Quantity3,200 m2 (1,600 panels)

Manufacturing and Quality Control

All panels were press-locked and welded on both bearing bars to eliminate racking under point loads. Zinc thickness was verified on every tenth panel with an electromagnetic gauge, and the client's third-party inspector attended the final dimensional and coating audit. Each panel received a laser-etched stainless tag showing platform code, bay number and panel ID, matched to the client's installation drawings and BIM export.

Project Results

  • 3,200 m2 shipped in 42 days, seven days ahead of the vessel cut-off.
  • Zero panels rejected on arrival; installation labor reduced by 25% compared with the client's previous welded-grating program.
  • Coating inspection recorded an average zinc thickness of 86 micron, 43% above the 60 micron ASTM A123 minimum for 5 mm steel.
  • The client adopted the same cross-section family as its standard for the 2026 refurbishment program.

Client Feedback

"Panel-level tagging and a single cross-section for all three platforms saved our offshore crew an estimated two weeks of crane time. We have already specified the same grating for next season's program." - Project Engineering Lead, Houston

About Hebei Luojie Metal Products Co., Ltd

Founded in 2002 in Anping County, Hebei Province, China, Hebei Luojie Metal Products Co., Ltd manufactures and exports steel grating and wire mesh products with a workforce of more than 500 people. The company supplies high-precision metal solutions to oil and gas, chemical processing, construction, mining and food filtration customers in over 50 countries across North America, Europe and Southeast Asia.