High Strength Q345 Steel Horse Fence Anti Chew Coating 1.8m Height
| Product Name: | Horse Fence | Key Word: | Horse Fence, Equestrian Fence |
|---|---|---|---|
| Material: | Q345 High-Strength Steel (Frame: 3.5mm; Mesh: 3.0mm) | Standard Height: | 1.8m (Customizable: 1.6-2.2m) |
| Mesh Size: | 15cm×20cm (Prevents Horse Leg Entrapment) | Surface Treatment:: | Food-Grade Anti-Chew Polyester Coating + Hot-Dip Galvanization |
| Impact Resistance: | ≥1200kg (Withstands Adult Horse Collision) | Compliance: | Meets FEI (Fédération Equestre Internationale) Standards |
| Highlight: | q345 steel horse fence,steel horse fence anti chew,q345 steel board horse fence |
||
High-Strength Q345 Steel Horse Fence Anti-Chew Coating 1.8m Height
Our specialized Horse Fence is engineered for equestrian farms, riding schools, and FEI-approved competition venues. Unlike ordinary livestock fences, it targets the unique needs of horses: 1.8m standard height prevents jumping (adult horses can jump up to 1.5m), 15cm×20cm mesh avoids leg entrapment (a common injury risk), and Q345 steel with 3.5mm frame withstands 1200kg impact (from spooked or galloping horses). The food-grade anti-chew coating is non-toxic (safe if horses nibble) and wear-resistant (lasts 8+ years without peeling).
Specification:
|
Model
|
Height
|
Mesh Size
|
Material
|
Surface Treatment
|
Impact Resistance
|
Applicable Scenario
|
|
HF-B180 (Basic)
|
1.8m
|
15×20cm
|
Q345 Steel (3.0mm mesh)
|
Galvanization + Anti-Chew Coating
|
≥1000kg
|
Daily Horse Raising, Pasture
|
|
HF-C200 (Competition)
|
2.0m
|
12×18cm
|
Q345 Steel (3.5mm mesh)
|
Double Galvanization + UV-Resistant Coating
|
≥1200kg
|
FEI Competitions, Riding Schools
|
|
HF-W220 (Wild Horse)
|
2.2m
|
15×25cm
|
Q345 Steel (4.0mm mesh)
|
Thickened Galvanization + Anti-Rust Paint
|
≥1500kg
|
Wild Horse Breeding, Large Pastures
|
Characteristics:
Anti-Jumping Height: 1.8-2.2m (matches adult horse jumping limit, no escape risk)
Leg-Protection Mesh: 15×20cm size (avoids horse leg getting stuck, reduces injury rate by 90%)
Anti-Chew Safety: Food-grade polyester coating (non-toxic, resists horse nibbling)
High Impact Resistance: Q345 steel frame (no deformation after 1200kg collision)
UV-Resistant: Coating withstands 1000h UV exposure (no fading in outdoor pastures)
Advantages:
FEI-Compliant: Meets international equestrian competition standards (usable for professional events)
Longer Service Life: 15-20 years (vs. 8-10 years of ordinary horse fences)
Low Injury Risk: Leg-protection mesh + smooth edges (no sharp points to scratch horses)
Custom Height: 1.6m (ponies) to 2.2m (warmblood horses) for different horse breeds
Fast Installation: Pre-attached fence clips (1 person installs 30m/hour)
Technology:
Anti-Chew Coating Tech: 3-layer polyester spraying (adhesion ≥5MPa, no peeling after 1000+ chews)
High-Strength Steel Processing: Quenching + tempering (improves Q345 steel toughness by 40%)
Mesh Weaving: Locked weaving (no loose wires, prevents horse hooves from catching)
Application:
Equestrian Farms: Separates stallions, mares, and foals (prevents fighting)
Riding Schools: Defines training areas (dressage, jumping practice zones)
FEI Competitions: Marks competition arenas (compliant with safety standards)
Pony Ranches: 1.6m height for ponies (prevents escape without wasting material)
Operation Method:
Installation Steps: ① Fix equestrian-specific posts (3m spacing, 0.8m buried underground) → ② Unroll fence, align with posts → ③ Fasten with stainless steel clips (every 20cm) → ④ Tighten with hydraulic tensioner (avoid slack) → ⑤ Install safety gates (1.2m width for horse passage)
Maintenance Steps: ① Check coating for peeling monthly → ② Clean with neutral detergent quarterly → ③ Touch up coating scratches with matching paint
![]()
![]()